remainder – nixCraft

Shell script to find whether an input number is palindrome or not

in Academic, Shell Math last updated April 12, 2008

A palindrome is a word, phrase, number or other sequence of units that has the property of reading the same in either direction (the adjustment of punctuation and spaces between words is generally permitted). Composing literature in palindromes is an example of constrained writing. The word “palindrome” was coined from Greek roots palin (“back”) and dromos (“way, direction”) by English writer Ben Jonson in the 1600s.

A palindromic number is a number where the digits, with decimal representation usually assumed, are the same read backwards, for example, 58285. They are studied in recreational mathematics where palindromic numbers with special properties are sought. A palindromic prime is a palindromic number that is a prime number.

#!/bin/bash
# Shell script to find whether an input number is palindrome or not
# -----------------------------------------------
# Copyright (c) 2006 nixCraft <http://cyberciti.biz/fb/>
# This script is licensed under GNU GPL version 2.0 or above
# -------------------------------------------------------------------------
# This script is part of nixCraft shell script collection (NSSC)
# Visit http://bash.cyberciti.biz/ for more information.
# -------------------------------------------------------------------------

echo -n "Enter number : "
read n

# store single digit
sd=0

# store number in reverse order
rev=""

# store original number
on=$n

while [ $n -gt 0 ]
do
    sd=$(( $n % 10 )) # get Remainder 
    n=$(( $n / 10 ))  # get next digit
    # store previous number and current digit in reverse 
    rev=$( echo ${rev}${sd} ) 
done

if [ $on -eq $rev ];
then
  echo "Number is palindrome"
else
  echo "Number is NOT palindrome"
fi

#!/bin/bash

# Shell script to find whether an input number is palindrome or not

# -----------------------------------------------

# This script is licensed under GNU GPL version 2.0 or above

# -------------------------------------------------------------------------

# This script is part of nixCraft shell script collection (NSSC)

# Visit http://bash.cyberciti.biz/ for more information.

# -------------------------------------------------------------------------

echo -n "Enter number : "

read n

# store single digit

sd=0

# store number in reverse order

rev=""

# store original number

on=$n

while [ $n -gt 0 ]

sd=$(( $n % 10 )) # get Remainder

n=$(( $n / 10 )) # get next digit

# store previous number and current digit in reverse

rev=$( echo ${rev}${sd} )

done

if [ $on -eq $rev ];

then

echo "Number is palindrome"

else

echo "Number is NOT palindrome"

Shell program to read a number and find the sum of digits

in Academic, Shell Math last updated April 8, 2008

#!/bin/bash
# Shell program to read a number and find the sum of digits
# -----------------------------------------------
# Copyright (c) 2005 nixCraft project <http://cyberciti.biz/fb/>
# This script is licensed under GNU GPL version 2.0 or above
# -------------------------------------------------------------------------
# This script is part of nixCraft shell script collection (NSSC)
# Visit http://bash.cyberciti.biz/ for more information.
# -------------------------------------------------------------------------

echo -n "Enter number : "
read n

# store single digit
sd=0

# store number of digit 
sum=0

# use while loop to caclulate the sum of all digits
while [ $n -gt 0 ]
do
    sd=$(( $n % 10 )) # get Remainder 
    n=$(( $n / 10 ))  # get next digit
    sum=$(( $sum + $sd )) # calculate sum of digit
done
echo  "Sum of all digit  is $sum"

#!/bin/bash

# Shell program to read a number and find the sum of digits

# -----------------------------------------------

# This script is licensed under GNU GPL version 2.0 or above

# -------------------------------------------------------------------------

# This script is part of nixCraft shell script collection (NSSC)

# Visit http://bash.cyberciti.biz/ for more information.

# -------------------------------------------------------------------------

echo -n "Enter number : "

read n

# store single digit

sd=0

# store number of digit

sum=0

# use while loop to caclulate the sum of all digits

while [ $n -gt 0 ]

sd=$(( $n % 10 )) # get Remainder

n=$(( $n / 10 )) # get next digit

sum=$(( $sum + $sd )) # calculate sum of digit

done

echo "Sum of all digit is $sum"

Shell program to read a number and reverse the number

in Academic, Shell Math last updated April 8, 2008

#!/bin/bash
# Shell program to read a number and reverse the number
# for example 123 should output as 321
# -----------------------------------------------
# Copyright (c) 2005 nixCraft project <http://cyberciti.biz/fb/>
# This script is licensed under GNU GPL version 2.0 or above
# -------------------------------------------------------------------------
# This script is part of nixCraft shell script collection (NSSC)
# Visit http://bash.cyberciti.biz/ for more information.
# -------------------------------------------------------------------------

echo -n "Enter number : "
read n

# store single digit
sd=0

# store number in reverse order
rev=""

# store original number
on=$n

# use while loop to caclulate the sum of all digits
while [ $n -gt 0 ]
do
    sd=$(( $n % 10 )) # get Remainder 
    n=$(( $n / 10 ))  # get next digit
    # store previoues number and current digit in rev
    rev=$( echo ${rev}${sd} ) 
done

echo  "$on in a reverse order $rev"

#!/bin/bash

# Shell program to read a number and reverse the number

# for example 123 should output as 321

# -----------------------------------------------

# This script is licensed under GNU GPL version 2.0 or above

# -------------------------------------------------------------------------

# This script is part of nixCraft shell script collection (NSSC)

# Visit http://bash.cyberciti.biz/ for more information.

# -------------------------------------------------------------------------

echo -n "Enter number : "

read n

# store single digit

sd=0

# store number in reverse order

rev=""

# store original number

on=$n

# use while loop to caclulate the sum of all digits

while [ $n -gt 0 ]

sd=$(( $n % 10 )) # get Remainder

n=$(( $n / 10 )) # get next digit

# store previoues number and current digit in rev

rev=$( echo ${rev}${sd} )

done

echo "$on in a reverse order $rev"

Shell program to calculate the number of digits in a number read from the user

in Academic, Shell Math last updated April 8, 2008

#!/bin/bash
# Shell program to calculate the number of digits in a
# number read from the user
# -----------------------------------------------
# Copyright (c) 2005 nixCraft project <http://cyberciti.biz/fb/>
# This script is licensed under GNU GPL version 2.0 or above
# -------------------------------------------------------------------------
# This script is part of nixCraft shell script collection (NSSC)
# Visit http://bash.cyberciti.biz/ for more information.
# -------------------------------------------------------------------------

echo -n "Enter number : "
read n

sd=0

# store number of digit 
nd=0
on=$n # store $n so that we can use it later

# use while loop to caclulate the number of digit
while [ $n -gt 0 ]
do
    sd=$(( $n % 10 )) # get Remainder 
    n=$(( $n / 10 )) 
    nd=$(( $nd + 1)) # calculate all digit in a number till n is not zero
done
echo  "Numnber of digit in a $on is $nd"

#!/bin/bash

# Shell program to calculate the number of digits in a

# number read from the user

# -----------------------------------------------

# This script is licensed under GNU GPL version 2.0 or above

# -------------------------------------------------------------------------

# This script is part of nixCraft shell script collection (NSSC)

# Visit http://bash.cyberciti.biz/ for more information.

# -------------------------------------------------------------------------

echo -n "Enter number : "

read n

sd=0

# store number of digit

nd=0

on=$n # store $n so that we can use it later

# use while loop to caclulate the number of digit

while [ $n -gt 0 ]

sd=$(( $n % 10 )) # get Remainder

n=$(( $n / 10 ))

nd=$(( $nd + 1)) # calculate all digit in a number till n is not zero

done

echo "Numnber of digit in a $on is $nd"

Shell script to read a number and find whether the number is odd or even

in Decision Making last updated April 5, 2008

#!/bin/bash
# Shell script to read a number and find whether the number is odd or even
# -------------------------------------------------------------------------
# Copyright (c) 2005 nixCraft project <http://cyberciti.biz/fb/>
# This script is licensed under GNU GPL version 2.0 or above
# -------------------------------------------------------------------------
# This script is part of nixCraft shell script collection (NSSC)
# Visit http://bash.cyberciti.biz/ for more information.
# -------------------------------------------------------------------------

echo -n "Enter numnber : "
read n

rem=$(( $n % 2 ))

if [ $rem -eq 0 ]
then
  echo "$n is even number"
else
  echo "$n is odd number"
fi

#!/bin/bash

# Shell script to read a number and find whether the number is odd or even

# -------------------------------------------------------------------------

# This script is licensed under GNU GPL version 2.0 or above

# -------------------------------------------------------------------------

# This script is part of nixCraft shell script collection (NSSC)

# Visit http://bash.cyberciti.biz/ for more information.

# -------------------------------------------------------------------------

echo -n "Enter numnber : "

read n

rem=$(( $n % 2 ))

if [ $rem -eq 0 ]

then

echo "$n is even number"

else

echo "$n is odd number"

Script to display sum of two number and to do calculations such as +, -, / etc

in Shell Math last updated April 15, 2008

#!/bin/bash
# Script to display sum of two number and to do calculations such as +, -, / etc
# -------------------------------------------------------------------------
# Copyright (c) 2005 nixCraft project <http://cyberciti.biz/fb/>
# This script is licensed under GNU GPL version 2.0 or above
# -------------------------------------------------------------------------
# This script is part of nixCraft shell script collection (NSSC)
# Visit http://bash.cyberciti.biz/ for more information.
# ----------------------------------------------------------------------
echo "**** My calculator ****"
echo "M A I N - M E N U"
echo "1. Multiplication"
echo "2. Subtraction"
echo "3. Remainder"
echo "4. Divide"
echo -n "Please select your choice (1-4) : "
read choice

echo -n "Enter your first number : "
read n1
echo -n "Enter your second number : "
read n2

if [ $choice -eq 1 ]
then
	answer="$n1 x $n2 = $(( $n1 * $n2 ))"
elif [ $choice -eq 2 ]
then
	answer="$n1 - $n2 = $(( $n1 - $n2 ))"
elif [ $choice -eq 3 ]
then
	answer="$n1 % $n2 = $(( $n1 % $n2 ))"
elif [ $choice -eq 4 ]
then
	answer="$n1 / $n2 = $(( $n1 / $n2 ))"
else
	echo "Sorry please select number between 1-4 only"
	exit 1
fi
echo $answer

#!/bin/bash

# Script to display sum of two number and to do calculations such as +, -, / etc

# -------------------------------------------------------------------------

# This script is licensed under GNU GPL version 2.0 or above

# -------------------------------------------------------------------------

# This script is part of nixCraft shell script collection (NSSC)

# Visit http://bash.cyberciti.biz/ for more information.

# ----------------------------------------------------------------------

echo "**** My calculator ****"

echo "M A I N - M E N U"

echo "1. Multiplication"

echo "2. Subtraction"

echo "3. Remainder"

echo "4. Divide"

echo -n "Please select your choice (1-4) : "

read choice

echo -n "Enter your first number : "

read n1

echo -n "Enter your second number : "

read n2

if [ $choice -eq 1 ]

then

answer="$n1 x $n2 = $(( $n1 * $n2 ))"

elif [ $choice -eq 2 ]

then

answer="$n1 - $n2 = $(( $n1 - $n2 ))"

elif [ $choice -eq 3 ]

then

answer="$n1 % $n2 = $(( $n1 % $n2 ))"

elif [ $choice -eq 4 ]

then

answer="$n1 / $n2 = $(( $n1 / $n2 ))"

else

echo "Sorry please select number between 1-4 only"

exit 1

echo $answer